Preparation and Characterization of Nanotitanium Dioxide Coating Film Doped with Fe^3＋ Ions on Porous Ceramic

The nanotitanium dioxide （TiO2） photocatalytic and porous ceramic filtering technique is one of the advanced methods to effectively treat organic wastewater. The TiO2 sol doped with Fe^3＋ ions was prepared by sol-gel processing. The influences of the process conditions of coating nanophotocatalytic material- Fe^3＋-TiO2 film on the surface of porous ceramic filter by dipping-lift method on the performance of porous ceramic filter were studied. The porous ceramic filters have two functions at the same time, filtration and photocatalytic degradation. The results of this study showed that the pH and viscosity of the sol, amount of Fe^3＋ ions doped as well as the coating times greatly affect the quality of coating film, the performance parameters and the photocatalytic activity of the porous ceramic filter. When the pH of the sol is 3-4, the viscosity is about 6 mPa.S, the amount of doped Fe^3＋ ions is about 2.0 g/L, the porous ceramic filter has been shown to have the best filtering performance and photocatalytic activity. In this condition, the porosity of porous ceramic is about 42.5%, the pore diameter is 8-10μm. The degradation of methyl-orange is 74.76% under lighting for 120 rain.     

Ruthenium(II) complexes of monodonor ligands: efficient reagents for asymmetric ketone hydrogenation

[Chemical reaction: See text] A series of BINOL-derived ligands have been prepared and incorporated into ruthenium(II) complexes containing a diamine ligand. The complexes have proven to be excellent catalysts for the asymmetric hydrogenation of ketones, giving reduction products with enantiomeric excesses of up to 99%.     

CHROMATOGRAPHIC SEPERATION AND PURIFICATION OF HUMAN CHORIONIC GONADOTROPIN

ＣＨＲＯＭＡＴＯＧＲＡＰＨＩＣＳＥＰＥＲＡＴＩＯＮＡＮＤＰＵＲＩＦＩＣＡＴＩＯＮＯＦＨＵＭＡＮＣＨＯＲＩＯＮＩＣＧＯＮＡＤＯＴＲＯＰＩＮＷａｎｇＨａｉｆｅｎｇ；ＸｕＹｕｔａｉ；ＲｅｎＲｏｕｇｌｉ；ＴａｎｇＬｅｉ；ＷａｎｇＨａｉｒｅｎ（Ｄｅｐａｒｔｍｅ...     

High performance carbon-supported catalysts for fuel cells via phosphonation

Carbon-supported catalysts were phosphonated using 2-aminoethylphosphonic acid, and the resulting catalysts with largely enhanced proton conductivity performed substantially better than the untreated counterparts in proton-exchange membrane fuel cells.     

The design of an on-line semi-preparative LC-SPE-NMR system for trace analysis

This paper reports the design of an on-line semi-preparative LC-SPE-NMR system and its use in the structural analysis of mixture components at the 0.02-1% level. The combination provides at least a five fold mass sensitivity increase over that obtained from typical analytical LC-SPE systems and a >30-fold total NMR sensitivity enhancement over analysis by LC-NMR. This is accomplished by using a novel on-line device to store, dilute (1-100-fold) and deliver (at an optimized flow-rate) the isolated component of interest to an SPE trap unit. The SPE unit consists of two cartridges connected in parallel to increase the overall SPE capacity and also to decrease the flow-rate through each trap for enhanced trapping efficiency. As the coupling of semi-preparative LC with NMR (through SPE) is well matched in terms of optimal mass loading for both techniques, only one LC-SPE cycle is required to enrich a 50 microg ml(-1) component (1% in a 5 mg ml(-1) mixture) for the acquisition of heteronuclear (1)H-(13)C NMR data using a conventional NMR flow probe. Furthermore, analytes at the 0.02% level (approximately 1 microg ml(-1)) can be studied using 2D (1)H NMR techniques if peak cuts from replicate sample injections (> or =3) are accumulated into the storage/dilution unit and the resulting solution processed by just one SPE trap and elute cycle.     

Selective functionalizations of 2-phenylpyridine: lactones upon organic versus organometallic activations

2-Phenylpyridine activated by chromium tricarbonyl reacts with bis(TMS) ketene acetals to give pyridine-substituted bicyclic γ-lactones. On the other hand, its reaction with the same acetals leads, upon activation with methylchloroformate, to dihydropyridines which can be oxidized to highly substituted, lactone-containing piperidines.     

Ga3(HPO3)4F4(H3DETA) (DETA=diethylenetriamine): A new open-framework fluorinated gallium phosphite with pentameric building unit

Ga₃(HPO₃)₄F₄(H₃DETA) is a new open-framework fluorinated gallium phosphite obtained by mild hydrothermal synthesis using diethylenetriamine as templated agent and characterized by single crystal X-ray diffraction, the powder X-ray diffraction, IR spectroscopy, TGA, ICP and elemental analyses. It crystallizes in the monoclinic space group C2/c, a=12.741(6) Å, b=12.068(6) Å, c=11.988(5) Å, β=94.902(8)^o, V=1836.6(15) Å³, Z=4. The construction of 3D open-framework structure in the title compound may be viewed as the assembly of pentameric building units and HPO₃ groups. The pentameric building unit is the first to be found, which lead to form the three types of channels along a-, b- and c-axes, respectively, in gallium phosphite. The triprotonated DETA cations are inserted within the 10-membered ring channels and interact with anions of the framework via hydrogen bonds.     

自由基活性聚合及其最新进展

本文介绍了实现自由基活性聚合的动力学、热力学条件及可能的途径。在这些条件下自由基保持稳定的低浓度，增长链自由基与休眠种处于动力学平衡动态，可有效地控制聚合反应，使聚合反应具有聚合物分子量随反应时间、单体转化率成线性增长关系及所得聚合物分子量分布较窄的特征，并且在加入第二单体时可继续生成嵌段共聚物。     

高硅沸石骨架结构及其稳定性的模拟计算(I)*

The lattice energy of a series of high-silica zeolites was determined using the lattice energy minimization method. The results were compared to the lattice energy of dense polymorphs of SiO2. All high-silica zeolites frameworks are only 30～67kJ•mol-1 less stable than α-quartz This may imply that there is little energy barrier to the formation of high-silica zeolites frame-works and explain the structural diversity observed for high-silica zeolites. The relationships of calculated lattice energies and framework Structures was disscussed. The results revealed a good linear relationship between framework density of these molecular sieves and all-silica framework lattice energies.     

The Ternary System Li2O-Al2O3-B2O3: Compounds and Phase Relations

The ternary system Li₂O-Al₂O₃-B₂O₃ is reinvestigated with solid-state reaction and X-ray powder diffraction technique to clarify some long-standing uncertainties. The phase relations are constructed based on the phase identifications of 51 ternary samples. Six ternary compounds, Li₂AlB₅O₁₀, LiAlB₂O₅, Li₃AlB₂O₆, Li₂AlBO₄, LiAl₇B₄O₁₇ and a compound with a composition close to 0.66Li₂O·0.06Al₂O₃·0.28B₂O₃, are observed or confirmed in this system, and the thermal stability of these ternary compounds is also discussed on the basis of DTA experimental results.